Frequently Asked Question
How do I load a new project file?
Last Updated 9 years ago
You may need to replace the existing Split-Online project file with a new one.
To load the new file (attached) please follow the directions below:
1.Copy the new project file into the Split-Online Projects directory (i.e. C:\Split Data\Projects)
2.Stop the channels from running by selecting “Stop All Channels” from the “Channels” menu in Split-Online
3.Load the new project by selecting “Open…” from the “Projects” menu and selecting the new projects file (i.e. C:\Split Data\Projects\ New Project .sop)
4.Please note to select “Open…” from the “Projects” menu and not the “File” menu
5.Once the new project is loaded save the project by selecting “Save” from the “Projects” menu… this is to ensure the correct file is loaded on autostart (e.g. after a power failure)
6.Start the channels running again by selecting “Run All Channels” from the “Channels” menu
To load the new file (attached) please follow the directions below:
1.Copy the new project file into the Split-Online Projects directory (i.e. C:\Split Data\Projects)
2.Stop the channels from running by selecting “Stop All Channels” from the “Channels” menu in Split-Online
3.Load the new project by selecting “Open…” from the “Projects” menu and selecting the new projects file (i.e. C:\Split Data\Projects\ New Project .sop)
4.Please note to select “Open…” from the “Projects” menu and not the “File” menu
5.Once the new project is loaded save the project by selecting “Save” from the “Projects” menu… this is to ensure the correct file is loaded on autostart (e.g. after a power failure)
6.Start the channels running again by selecting “Run All Channels” from the “Channels” menu